shear beam Weigh module for silo scale or hopper scale

1t,2t,3t,5t,10t, made by shearbeam load cell, high precision up to NTEP1: 5000

Advantages of weigh module for silo scale and hopper scale:

1.Welded or glue sealed load cell

2.Round connection, always keep vertical weigh

3.Supporting bolts, prevent dumping and easy to repair

4.Grounding equipment, protect the load cell from

Surge impact

5.Overload protection, prevent overload of load cell.

PARAMETER	UNIT	TECHNICAL DATA
Rated capacity (Emax)	kg	100/200/300/500/1000/2000/2500/4000/5000/10,000/15,000/20,000
Accuracy class		C3
Sensitivity	mV/V	3.0+- 0.25%
Zero balance	mV/V	0.02
Creep over 30min	%	0.02
Temperature effect on zero	%/	0.0040
Temperature effect on output	%/	0.0014
Hysteresis	%	0.017
Linearity deviation	%	0.017
Repeatability	%	0.017
Nominal temperature range		-10 to +40
Service temperature range		-30 to +70
Limit load	% of R.C.	150
Break load	% of R.C.	200
Nominal excitation	V	5~12
Max. excitation	V	15
Input impedance		380 +-25
Output impedance		350+- 5
Insulation resistance	M	>2000
Cable length	M	2
Cable type		4 conductors, Braid Shielded, Black PVC Jacket
Color code		+Exc-Red, +Sig -Grn, -Exc-Blk, -Sig- Wht
Construction		Alloy steel, stainless steel available
Protection class to IEC529		IP 67, IP68 available

Installation:

Available Weighing controller for silo sclae: High precision, to make 2t sclae with 2kg weight to calibrate.

IN-420 Weighing Indicator Controller for batching scale silo scale

Interchangeable With ATRAX 420 PLUS INDICATOR

• RS485/RS232 signal output with Modbus rtu available
• 2 RELAYS(Optional)
• Free PC software with programable for all function

Weight Controller Function:

• Auto zero scale • Auto zero tracking • Normal weighing

• Peak • Counting • Zero scale • Gross/Net
• Tare • RS-232C • RS-485 • Print interface (PS805 Printer)

Has an A/D adopted conversion technology of a 24-bit microprocessor with a rate of conversion of 200 cycles

per second and drives up to eight 350Ω or sixteen 700Ω load cells.

With a SS304 stainless steel wash down enclosure is ideal for the food industry, agricultural industry, and industrial applications

and COMPLY WITH STANDARD OF NTEP III/IIIL, 10000 and Measurement Canada III, 10000; III HD 20000.

• COMPLY WITH STANDARD OF NTEP III/IIIL, 10 000
• COMPLY WITH STANDARD OF Measurement Canada III, 10 000; III HD 20 000
• Material: Stainless steel SS304
• IP Rating: IP66
• LED 6-digit display
• Power Supply: AC adaptor, 100-240VAC, 50-60Hz
• Parameter and calibration settings are performed on the front panel
• LABRADOR computer software for parameter and calibration settings
• Units of Measurement: kg, lb
• Improper operation and fault indication
• Two way relay signal output
• Equipped with RS-232 and RS-485 connecting ports
• Print functions with programmable print format
• Built-in clock

Weight Controlloer Data

INNOVATION ELECTRONIC CO..,LTD Focus on Weighing and Static solution in Packing industry!

In the past tens of years, we established very good relationship with wide range of suppliers and customers in weighing and static products especially in packing industry and also investigated in our own factories of weighing and static, step by step, we get our own special advantages in this market: more accuracy and more economic weighing and static solution for you!

Our weighing solution mainly include:

1. all kinds of load cells( tension and compression load cell, s type load cell, single point load cell, shear beam load cell, those load cells are widely used in kinds of packing industry like food weighing and packing, cement weighing and packing, chemical dosing and packing, pharmaceutical dosing and packing, electronic balance, silo scale, truck scale, etc. )

2. High accuracy bench scale, floor scale, table scale, counting scale. They are widely used in kinds of places that need high accuracy weighing, like small bolts counting and packing, expensive powder and particles weighing and packing, sub-package system,etc.

3. Weighing equipment like dosing machine, checkweigher, roller conveyor scale, etc. This equipment are widely used in weighing and packing production line. The main use is to feed material of set quantity, and double check whether the weight is in the allowed range or not and eliminate the packages that not in allowed range.

The Static solution mainly include:

1. Static charging machine of 20KV, 30KV, 60KV, 100KV. They are wide used in packing material production line, like plastic film machine, bag making machine, IML labeling machine,side weld bag handles, shrink wrapping, electrostatic bonding, etc.

2. Static eliminators of 7.5KV, 6kv, AND anti-static bar,Ionizing air gun, Ionizing Air nozzle, Static foam, etc. These eliminators are widely used in static elimination before packing of finished products. It is to make the packing better, or to remove the dust on the surface of products.

If you have any weighing or static problem especially in packing industry, contact us, we are confident to provide you a suitable and economic Solution!